Gigabit Switch und Netzwerkkarten

You've just added this product to the cart:

  • Gigabit PCI Ethernet Network Card 10/100/1000 Mbit/s

    The LCS-8037TXR4 is a high performance Ethernet adapter built on 32-bit PCI bus architecture and proven technology of Gigabit Ethernet. Working 10 times faster than fast Ethernet adapter, LCS-8037TXR4 would deliver what you need on a current wire-speed network. The LCS-8037TXR4 is upgraded to Gigabit no longer means expensive re-cabling with fiber optic cables. Instead of costly fiber optic cables, The LCS-8037TXR4 use network-grade copper cables. All you need is installing new Gigabit adapters and switches without changing existing CAT5 cabling. The LCS-8037TXR4 is built with network speed auto-negotiation capability that allows the adapter automatically negotiated to maximum speed performance.

    Features:

    • Compliant with PCI V2.2; 2.1; 2.0, 32-bit, 33/66-MHz .

    • Compliant with 10/100/1000 Mbps Full/Half-Duplex triple-speed operation

    • Fully compliant with IEEE 802.3z, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

    • Support Full Duplex flow control (IEEE 802.3x)

    • Support VLAN tagging (IEEE 802.1q)

    • IEEE 802.1p Priority queuing for 4 classes of priority queues

    • Support Crossover Detection & Auto-Correction

    • Wake-On-LAN and remote wake-up support

    • Support power-down/link-down power saving

    • Support Jumbo frame up to 7Kbyte

    • 8Kbits for transmit buffer, 64Kbits for receive buffer

  • Gigabit PCI Express Ethernet Adapter 10/100/1000Mbit/s

    The LCS-8337TXR1 is a high performance Gigabit Ethernet adapter designed for PCI Express Bus, which has better performance than the current PCI interface. With supporting connection speed up to 1000 Mbit/s, the LCS-8338TXR1 boosts your networking throughput easily. It allows users to transfer high-bandwidth needed files faster and hence get a real efficiency improvement. The LCS-8338TXR1 also supports NWay auto-negotiation that detects the networking speed (10/100/1000 Mbit/s) and the duplex modes (full/half) automatically. Auto-MDI/MDI-X is also supported to eliminate the effort choosing crossover cables.

    Features:

    • Compliant with PCI Express 1.0a - x1 PCI Express standard

    • Supports 10/100/1000 Mbit/s

    • Supports Full/Half-Duplex auto negotiation

    • Supports Full Duplex flow control

    • Supports Support Auto-MDI/ MDI-X auto crossover

    • Compliant with CSMA/CD protocol

    • Supports Wake-On-LAN

    • Supports ACPI Power Management, compliant to ACPI 2.0

    • Integrated 128KB Frame Buffer Memory

    • LEDs for diagnostics

    • Supported Operating Systems: Windows 10/7/98SE/ME/2000/X64/XP

  • 5-Port Switch Fanless Metall Housing 10/100/1000 Mbit/s Loop Detection

    The LCS-GS7105-D Switch has 5 Ports à 10/100/1000Mbit/s, all eight Ports have Auto-negotation and Auto MDI/MDI-X. The Switch is very flexible to use, at home or in offices, he connects any networking structures from 10Mbit/s, 100Mbit/s to 1000Mbit/s. His datarate from up to 1000Mbit/s and the implemented Store-and-Forward feature gives you a high data-throughput with automatic error correction for the whole network. The small dimensions and the wallmount-kit makes him fittible in every situation.

    Features:

    • Interface: 5 Ports with 10/100/1000Mbit/s

    • Supports Full- und Half-Duplex operations on all Ports

    • Supports Auto MDI-/MDI-X

    • Supports back-pressure (Half Duplex) and flow control (IEEE 802.3x)

    • Store-and-Forward Architecture is filtering Fragments and CRC error pakets

    • Supports Jumbo Frames 12K

    • Small Desktop-Case

    • EEE Energy Efficient Ethernet IEEE802.3az

    • Loop Detection

    • LEDs for Networkdiagnostic

  • 8-Port Switch Fanless Metall Housing 10/100/1000 Mbit/s Loop Detection

    The LCS-GS7108-D Switch has eight Ports à 10/100/1000Mbit/s, all eight Ports have Auto-negotation and Auto MDI/MDI-X. The Switch is very flexible to use, at home or in offices, he connects any networking structures from 10Mbit/s, 100Mbit/s to 1000Mbit/s. His datarate from up to 1000Mbit/s and the implemented Store-and-Forward feature gives you a high data-throughput with automatic error correction for the whole network. The small dimensions makes him fittible in every situation.

    Additional this Switch offers Loop detection and fullfill Green Ethernet standards.

    Features:

    • Interface: 8 Ports with 10/100/1000Mbit/s

    • Supports Full- und Half-Duplex operations on all Ports

    • Supports Auto MDI-/MDI-X

    • Supports back-pressure (Half Duplex) and flow control (IEEE 802.3x)

    • Store-and-Forward Architecture is filtering Fragments and CRC error pakets

    • Supports Jumbo Frames 9K

    • Small Desktop-Case

    • LEDs for Networkdiagnostic

    • EEE Energy Efficient Ethernet IEEE802.3az

    • Loop Detection

    • Without fan

  • 16-Port Switch Fanless Green Ethernet 10/100/1000 Mbit/s

    Easily speed up your networking output, the 16-Port 10/100/1000 Mbps Gigabit switch LCS-GS8116-A provides you a real Gigabit connection. Users are now able to transfer large and high bandwidth-needed files faster and hence get a real efficiency improvement.

    Featured by flow control, this switch ensures the correctness of data transmitting. And the 802.3x and backpressure flow control mechanisms work respectively for full and half duplex modes. What’s more, Auto-MDI/MDI-X function alleviates the effort to use crossover cables. Users don’t need to prepare crossover cables for equipment connectivity.

    The switch is easy to installation and maintenance by plug-n-play without any software to configure and also fully compliant with all kinds of network protocols. And it supports IEEE 802.3az Energy Efficient Ethernet ability to promise operation in Low Power Idle Mode and save power consumption.

    Features:

    • 16 * 10/100/1000Mbps RJ-45 Nway ports

    • Supports NWay protocol for speed (10/100/1000Mbps) and duplex mode (Half/Full) auto-detection

    • Supports MDI/MDI-X auto crossover

    • Supports full and half duplex operation on all ports

    • Supports Green Ethernet: link-down and link-on cable length power saving.

    • Store-and-forward architecture filters fragment & CRC error packets

    • Supports IEEE 802.3az Energy Efficient Ethernet

    • Supports extensive LED indicators for network diagnostics

    • Supports Broadcast/Multiple storm control

    • 8.5 rack mount size design

    • 10 and 19 rack mount bracket (optional)

  • 16-Port Rackmount Switch Fanless Ethernet 10/100/1000 Mbit/s

    The LCS-GS9116-A is a powerful and high-performance Gigabit Ethernet switch with 16 10/100/1000 Mbps ports, providing you a cost-effective, space-saving solution for expanding your network. With the gigabit ports, transferring larger and high bandwidth-needed files faster in an easy way is probable. Automatic MDI/MDI-X crossover detection makes you no need to worry about the cable type by automatically switch the port’s receive and transmit connections with plugged in devices and alleviates the effort to use crossover cables. Flow control ensures the correctness of data transmitting. The 802.3x and backpressure flow control mechanisms work respectively for full and half duplex modes. The switch is plug and play without any software to configure and is also fully compliant with all kinds of network protocols. Moreover, the rich diagnostic LEDs on the front panel demonstrate the operating status of individual port and the whole system.

    Features:

    • Complies with 10 BASE-T specifications of the IEEE802.3 standard

    • Complies with 100BASE-TX specifications of the IEEE802.3u standard

    • Complies with 1000BASE-T specifications of the IEEE802.3ab standard

    • Supports back-pressure (half duplex) and flow control (IEEE 802.3x)

    • Supports NWay protocol for speed (10/100/1000Mbps) and duplex mode(Half/Full) auto-detection

    • Supports MDI/MDI-X auto crossover and polarity correction

    • Store-and-forward architecture filters fragment & CRC error packets

    • Supports 8K MAC address

    • Supports 256K bytes buffer memory

  • 24-Port Rackmount Switch with 2-Port miniGBIC Ethernet 10/100/1000 Mbit/s

    What you focus on is a powerful, high-performance Gigabit Ethernet switch LCS-GS9126 with 24 10/100/1000 Mbps ports, 2 SFP(mini GBIC) ports and one push button to turn on and off IEEE802.3az function, providing you a cost-effective, space-saving solution for expanding your network. The gigabit ports can lead you to a real gigabit connection, making you be able to transfer larger and high bandwidth-needed files faster in an easy way. And the two mini GBIC gigabit ports allow you to add fiber-optic connectivity for connecting to other network switches to obtain long-distance communication.

    Automatic MDI/MDI-X crossover detection ensures you no need to worry about the cable type by automatically switching the port’s receive and transmit connections with plugged in devices. Also, flow control ensures the correctness of data transmitting. What’s more, the 802.3x and backpressure flow control mechanisms work respectively for full and half duplex modes.

    Moreover, the rich diagnostic LEDs on the front panel demonstrate the operating status of individual port and the whole system.

    Features:

    • 24 ports gigabit non-blocking switch architecture

    • 2 SFP ports for optional fiber optical communication

    • Push ON/OFF button to enable/disable IEEE 802.3az

    • Supports MDI/MDI-X auto crossover

    • Supports NwWay protocol for speed and duplex mode autodetection

    • Supports back-pressure (half duplex) and flow control (IEEE 802.3x)

    • Store-and-forward architecture filters fragment & CRC error packets

    • Supports 10K bytes Jumbo frame

    • Supports IEEE802.3az Energy Efficient Ethernet

    • Internal power adapter

    • Rack mountable

  • Working on Dataentry

    Hier finden Sie in Kürze unsere Produkte