You've just added this product to the cart:

  •

    Complete Networking Information ALL DRIVER, DATASHEETS, MANUALS, …
    You find here all PDF, Manuals and Drivers: http://manual.longshine.de/

  • Industrial Converter PoE+ 100/1000 to SFP FX/GbE

    To enforce the IP surveillance and provide sufficient power to PD devices Longshine introduces CP863I, unmanaged PoE+ Media Converter designed for reliable network connectivity even in tough environment. The converter supports one 100/1000Base-T RJ45 port with IEEE802.3af/at PoE standard and one SFP port for 100FX/1000Base-X port. With IP30 protection it exhibits extreme tolerance in harsh temperature environment ranging from -40°C to 75°C. CP863I quickly installation with no software or additional configuration needed, proves to be a perfect solution for round the clock surveillance in hard-to-reach locations.

    The converter’s compact size is suitable to place it in the outdoor IP camera enclosure. The embedded PoE supports to install and deploy IP camera more conveniently. Some space limitation areas are more suitable to install this device.

    Media converter is an easy-to-setup and ready-to-use solution for PoE application system. Featuring Auto-MDI/MDIX and Auto-negotiation on copper port, the media converter automatically detects and configures the best mode of operation over a link. This eliminates the need for user setup or configuration procedure and simplifies installation, once installed these media converters operate automatically.

    With surge and ESD protection, the IMC-563P provides a high level of immunity against electromagnetic interference and heavy electrical surges, thus facilitating easy deployment in demanding environments.Note: The Fiber and Copper port speed must be same for media converter to function.

  •

    PoE Injector Gigabit

    This equipment is a single-port Power over Ethernet (PoE) injector. Design for use 10/100/1000 base-T Ethernet networks, this equipment injects DC power through CAT5 or CAT6 cable, this increases flexibility in the positioning of a PoE enabled device by eliminating for a nearby power source.With the user-friendly Web-based management interface, you can easily get the overall information of your LAN and makeconfigurations easily.

    The device is plug-and-play without any software configuration. Rich diagnostic LEDs on the front-panel provide the operating status of individual port and the whole system. Over current protection and circuit shorting protection are also supported to ensure the safety.

    Features:

    • Complies IEEE802.3, IEEE802.3u, IEEE802.3ab

    • Complies IEEE802.3at and IEEE802.3af

    • 1 Port 10/100 !000base-T (Data) for connection to the passive switch

    • 1 Port 10/100/1000base-T (Power/Data) for connection to PoE device (PD)

    • Automatic detects if the connected device is PoE enabled to avoid sending power to a non PoE

    • Provides 2 LED indicators include Power LED (Green) and PoE LED(Green)

    • LED (GreenSmall Desktop-Case

    • Internal power supply; support 100-240VAC input powerLEDs for Networkdiagnostic

  •

    8-Port PoE Desktop Switch Gigabit

    The device is a powerful, high-performance Gigabit Ethernet Switch, with all 8 ports capable of 10/100/1000Mbps auto-negotiation operation (NWay), which means the switch could automatically negotiate with the connected partners on the network speed and duplex mode. It is ideal for micro-segmenting large networks into smaller, connected subnets for improved performance, enabling the bandwidth demanding multimedia and imaging applications. Moreover, the 10/100/1000Mbps auto-sensing ability provides an easy way to migrate 10/100Mbps to 1000Mbps network with no pain.

    This switch supports PoE, which supplies power for connected devices via CAT 5 and above twisted cables. By integrating the data transmitting cable and power cord, it eliminates the effort constructing your network. You could easily connect a Wireless AP or a VoIP phone to this switch without looking outlets for them. Over current protection and circuit shorting protection are also supported to ensure the safety.

    The switch is plug-n-play without any software to configure and also fully compliant with all kinds of network protocols. Moreover, the rich diagnostic LED indicators on the front-panel provide the operating status of individual port and whole system.

    Features:

    • Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab standard

    • Compliant with IEEE 802.3af/at PoE standard (DTE power via MDI)

    • Provides 8 PoE ports with classification identify, Supports 31.5W maximum per PoE port

    • Supports over current protection and circuit shorting protection

    • 8 * RJ-45 ports for 1000BASE-TX and 100BASE-T and 10BASE-T connectivity

    • Supports MDI/MDI-X auto crossover

    • Supports 136W Max; Full load: 31.5W(at) x 4P + 5W = 131W ; 15.4W(af) x 8P + 5W = 128.2W

    • Wire-speed packet filtering and forwarding rate

    • Store-and-forward architecture filters fragment & CRC error packets

    • Supports extensive LED indicators for network diagnostics

    • Internal universal switching power supply

  •

    8-Port PoE Managed Desktop Switch Gigabit

    The Gigabit PoE+ Smart Managed Switch LCS-GSP8408 is equipped with 8 gigabit RJ45 ports. The switch supports high performance, enterprise-level security control & QoS Layer 2 management features. It supports the PoE+ (802.3af/at) standard and provides power to connected PD devices via CAT 5 twisted cables. With a total PoE power budget is 131W, up to 30W per port. The UM083 can easy connect the high-powered devices such as Wireless AP, IP Cameras or VoIP Phones.

    The WebGUI control each port status and bandwidth control by port rate limiting. The Storm Control feature protects against Broadcast, Multicast and Unicast Storm. The rich Quality of Service (QoS) & VLAN provides enhanced traffic management capabilities to move your data smoother and faster. The device supports a complete lineup of layer 2 features, including 802.1Q tag VLAN, Port Isolation, Port Mirroring, STP/RSTP, Link Aggregation Group and 802.3x Flow Control function. It also supports SNMP management functions.

    The switch complies with IEEE802.3az Energy Efficient Ethernet to save power consumption, Support IGMP Snooping function to improve traffic performance

    KEY FEATURES

    • 8 * RJ-45 ports for PoE+ 10/100/1000Mbps connectivity

    • Complies with IEEE802.3, 802.3u, 802.3ab, 802.3x, 802.3az, 802.3af/at Ethernet standards

    • Supports IEEE802.3x Flow Control and Back-Pressure control

    • Supports STP & RSTP

    • Supports LLDP Discovery

    • Supports VLAN : Static, Port Based, Tag Based, Voice OUI mode

    • Supports QoS : CoS, DSCP, CoS-DSCP, IP Precedence

    • Supports Security : Management Service (Telnet, HTTP, HTTPS, SNMP), Protected Port, Storm Control, DoS attack prevention

    • Supports Storm Filter (Broadcast, Unknown Multicast, Unknown Unicast)

    • Supports port based Ingress/Egress rate limit

    • Supports 8 queues is handled SP and WRR

    • Supports Jumbo Frame : 1518~10K Bytes

    • Supports 8 Link Aggregation Groups with Static & LACP types

    • Support port mirroring, Ping Testing, Copper Testing

    • Supports SNMP access control & trap event

    • Supports IGMP Snooping v2/v3

    • Supports IEEE802.3az EEE enable and disable

    • Supports Firmware upgrade and backup

    • Supports Configuration upgrade and backup

    • Supports per port PoE+ Power Budget Management

    • Total PoE power budget 131W

    • With Fan-less Design

  •

    24+4 Port PoE 370W Managed Desktop Switch Gigabit

    The Gigabit PoE+ Smart Managed Switch LCS-GSP9428 is equipped with 24 gigabit RJ45 ports and 4 SFP slots. The switch supports high performance, enterprise-level security control & QoS Layer 2 management features. It supports the PoE+ (802.3af/at) standard and provides power to connected PD devices via CAT 5 twisted cables. With a total PoE power budget is 370W, up to 30W per port. The LCS-GSP9428 can easy connect the high-powered devices such as Wireless AP, IP Cameras or VoIP Phones.

    The WebGUI control each port status and bandwidth control by port rate limiting. The Storm Control feature protects against Broadcast, Multicast and Unicast Storm. The rich Quality of Service (QoS) & VLAN provides enhanced traffic management capabilities to move your data smoother and faster. The device supports a complete line up of layer 2 features, including 802.1Q tag VLAN, Port Isolation, Port Mirroring, STP/RSTP, Link Aggregation Group and 802.3x Flow Control function. It also supports SNMP management functions.

    The switch complies with IEEE802.3az Energy Efficient Ethernet to save power consumption, Support IGMP Snooping function to improve traffic performance.

    KEY FEATURES

    • 24 * RJ-45 ports for PoE+ 10/100/1000Mbps connectivity

    • 4* SFP ports for 100/1000Mbps Fiber connectivity

    • Complies with IEEE802.3, 802.3u, 802.3ab, 802.3x, 802.3az, 802.3af/at Ethernet standards

    • Supports IEEE802.3x Flow Control and Back-Pressure control

    • Supports STP & RSTP

    • Supports LLDP Discovery

    • Supports VLAN : Static, Port Based, Tag Based, Voice OUI mode

    • Supports QoS : CoS, DSCP, CoS-DSCP, IP Precedence

    • Supports Security : Management Service (Telnet, HTTP, HTTPS, SNMP), Protected Port, Storm Control, DoS attack prevention

    • Supports Storm Filter (Broadcast, Unknown Multicast, Unknown Unicast)

    • Supports port based Ingress/Egress rate limit

    • Supports 8 queues is handled SP and WRR

    • Supports Jumbo Frame : 1518~10K Bytes

    • Supports 8 Link Aggregation Groups with Static & LACP types

    • Support port mirroring, Ping Testing, Copper Testing

    • Supports SNMP access control & trap event

    • Supports IGMP Snooping v2/v3

    • Supports IEEE802.3az EEE enable and disable

    • Supports Firmware upgrade and backup

    • Supports Configuration upgrade and backup

    • Supports per port PoE+ Power Budget Management

    • Total PoE power budget 370W

    • With Fan Design